A method for making a micro reciprocating grate.

　　This article belongs to the field of stove technology, specifically involving a micro stove.Reciprocating GrateIn northern China, winter lasts long, while in the south, boilers are important thermal energy equipment in residents' lives, especially in rural areas rich in biomass resources that are clean, convenient, and renewable. For example, blue carbon is a low volatile solid carbon product obtained from the pyrolysis of high-quality Jurassic coal at medium to low temperatures, resulting in coal tar and coal gas precipitation. Blue carbon has the advantages of high calorific value, low cost, and minimal pollution. Biomass pellets are generally new block-type environmentally friendly energy made from straw, rice husks, peanut shells, corn cobs, camellia seed shells, cottonseed hulls, and the three residues. Improving energy efficiency, protecting and improving the ecological environment, and solving the emission problems of ordinary people's breeding and heating have successfully reduced the carbon dioxide emission rate of ordinary coal-fired boilers. Reciprocating grates are mostly used in incinerators, and several grates make the entire furnace body very large, so micro reciprocating grates are rarely used in biomass boilers.

　　In order to solve the technical problems existing in the current technology, technicians make micro.Reciprocating GratePlay a role in biomass furnaces. This micro reciprocating grate, through full furnace automatic control and mobile remote control, does not exhibit concentrated combustion when burning evenly. The reciprocating grate is small in size and occupies a small area. The reciprocating grate fully burns using scientific structural principles, ensuring that raw materials are fully burned without waste. It is easy to install. Ignition is convenient. Unlike traditional coal-fired boilers that require kindling, this product is very convenient for initial ignition, requiring no kindling, with remote mobile ignition or automatic ignition. It is clean and hygienic, easy to manage. It greatly reduces the labor intensity of firefighters, saves fuel, and simultaneously achieves heating and hot water.

　　The technical solution of this utility model is: a micro reciprocating grate, the device includes three overlapping grates, the lower part of one end of the grate is a circular groove, and the other end is a stepped structure, the groove of the middle grate is clamped on a circular shaft fixed to the furnace body, and the other two grates are respectively connected to two vertical plates, the circular grooves of the device are respectively clamped on the circular shafts at one end of the connected vertical plates, and the other end of the vertical plates' circular shafts is connected to the furnace body, with eccentric connecting rods connected to the two vertical plates.Reciprocating GrateThere are multiple through holes on it. The upper part of the reciprocating grate furnace body is equipped with an igniter, and the ignition end of the igniter is equipped with a baffle. The upper part of the furnace body is equipped with a water jacket with water inlets and outlets, and the water jackets of the two furnace bodies are connected by connecting pipes. The furnace body is also equipped with a blower. The bottom of the furnace body is equipped with a slag ball.

　　In summary, the above grate is applied in civilian heating appliances, which can set fuel, combustion time, and heating parameters through existing automatic control, thereby achieving automatic refueling and temperature control, reducing the labor intensity of adding combustion materials and furnace slag, and also well utilizing the advantages of reciprocating grate combustion.