Let me explain the characteristics of biomass chain grate and how to save energy.

　　Let me explain to everyoneBiomass Chain GrateFeatures and how to save energy

　　Performance advantages of biomass chain grate

　　1. The boiler load adjustment range is large (30-110%), and it is easy to adjust.

　　2. Using a beam-type grate, the operating resistance of the grate is small; the cooling effect of the grate plate is good, resulting in a low failure rate; it adopts a fully welded membrane water-cooled wall structure with less "fuel" for the grate, good sealing, and low heat loss; the design of a large cross-section and high furnace chamber, combined with secondary air and optimized arch, effectively promotes the combustion of fly ash and slag, with actual measured thermal efficiency close to 90%, comparable to CFB series products. Biomass Chain Grate

　　3. Based on the special angular tube structure of the boiler body and its self-weight structure, the water circulation is reliable, the start-up is fast, and the temperature difference stress is small.

　　4. There is no need to add pure biomass or other bed materials to the boiler; the combustion is mainly based on the grate, combined with the arrangement of multiple flues, utilizing the separation effect to separate large particles in the flue gas, significantly reducing the original dust concentration of the boiler.

　　5. The extremely large load adjustment range of 30-110% is suitable for users' needs for variable boiler loads.

　　Biomass Chain GrateHow to achieve energy saving during use?

　　Currently, more and more factories and enterprises regard energy saving of biomass chain grate as one of the important indicators for boiler operation. The following will share how to achieve energy saving in steam boilers during use. Biomass Chain Grate

　　1. Recovery and utilization of condensate

　　The biomass chain grate generates steam, and most of the condensate produced from the steam is directly discharged as wastewater without being recycled. If recovered and utilized, it can not only save water and electricity costs but also reduce the consumption of oil and gas.

　　2. Transformation of the boiler control system

　　Biomass Chain GrateThe auxiliary blower and induced draft fan of the boiler can be appropriately adjusted. Using variable frequency technology can achieve the purpose of changing the power frequency to adjust the air volume, reducing energy costs. The operating parameters of the auxiliary drum and blower are directly related to the thermal efficiency and energy consumption of the boiler. Installing an energy-saving device on the boiler flue can also lower the flue gas temperature, thereby greatly improving thermal efficiency and saving electricity consumption of the blower. Biomass Chain Grate

　　3. Effective thermal insulation system for the boiler

　　Many steam boilers only do simple insulation, with steam pipes and thermal consumption equipment on the outside, causing a large amount of thermal energy to dissipate during transmission. If effective thermal insulation is applied to the boiler body, steam pipes, and thermal consumption equipment, it can improve insulation energy saving.

　　Alright, today I will explain to everyone up to this point. I hope the above article is helpful to everyone. If you have any questions, remember to leave a message or contact our online customer service. Wishing everyone good health and a good mood every day!