The principle and characteristics of the grate, the scale grate manufacturer will clarify for you.

　　Slotted GrateThe manufacturer believes that the increasingly serious environmental pollution problem has made people aware of the importance of sustainable development. The contradiction between the increasing amount of household waste and the relatively backward treatment technology has led to a large amount of land resources being occupied by waste backfill, making the issue of space waste unavoidable. Household waste takes a long time to decompose. How to effectively handle waste in a short time has become the main direction of research activities in related industries. Incineration has come into the public's view. Practice shows that waste incineration not only improves the efficiency of waste treatment but also avoids unnecessary pollution to the surrounding environment.

　　The slotted grate manufacturer believes that mechanical grate waste incinerators, as a mature technology internationally, not only have good burnout rates but also show better reliability in operation compared to other technologies. The advantages of the grate are mainly reflected in the following aspects: first, low failure rate and strong processing capacity; second, low emissions, reducing unnecessary investment in flue gas purification; small wear on the heated surface, and no need for pre-treatment of waste.

　　Slotted GrateThe manufacturer believes that the main problem faced by existing grates in the waste incineration process is the current incomplete waste classification, where metal materials such as nails and screws can easily get stuck in the gaps of the grate during incineration, affecting the rotation of the grate. The key to solving this problem is not only waste classification but also the need to modify the mechanical grate from the perspective of installing fixed shafts and transforming hydraulic devices. Compared to waste classification, the effect of modifying the grate is more immediate.

　　The slotted grate manufacturer believes that the installation accuracy of the grate is very high. Therefore, before installing the grate pieces, the construction personnel should complete the installation of the grate pieces and use a level to measure the installed grate pieces to ensure they are at the same level. If there is a large deviation in the level position of the grate pieces during measurement, it is necessary to check the installed fixed shafts to ensure that the level of the fixed shafts meets the relevant requirements, and then use a grinding machine to grind the contact points of the brackets, accurately recording the gaps of the grate. It is important for construction personnel to note that reinforcement is an essential step in the process of modifying the fixed shafts of the grate. Common tools for reinforcing fixed shafts are steel plate reinforcement plates, and the main reinforcement method is welding.

　　Slotted GrateThe manufacturer believes that before welding, construction personnel should pull lines to measure the fixed shafts of the grate and record areas with deformation issues, correcting them with flame heating. Due to the high installation accuracy requirements of the grate, the straightness of the corrected fixed shafts should be controlled within 3 millimeters. The assembly plan for the processed grate pieces is fixed, which can avoid a series of issues such as dust leakage, air leakage, and hoisting. In addition, the materials responsible for separating the grate pieces have good fire resistance, and finely processed grate pieces can reduce wear caused by metal materials such as nails and screws during operation, extending the service life while ensuring processing efficiency, thus achieving the purpose of modification.