What is the structure and combustion process of a reciprocating grate?

The reciprocating grate is a commonly used furnace type for medium and small-sized biomass combustion devices. The reciprocating grate mainly consists of a fixed grate, a movable grate, a transmission mechanism, and a reciprocating mechanism. The tail end of the movable grate is clamped on the movable beam, while its front end is directly laid on the adjacent surrounding grates, forming a distinct trapezoidal shape with a certain angle to facilitate the downward movement of the fuel. Each row of movable beams is connected to two channel steels to form a whole, creating a movable frame.

How to make the beam grate energy-saving and emission-reducing

The beam grate uses anti-scaling and descaling technology; it optimizes the steam circulation system by utilizing boiler descaling agents and electronic anti-scaling agents, reasonably controls the boiler discharge rate, reduces scaling, and improves boiler thermal efficiency.

The working effect of the beam grate.

The beam grate is a component that accumulates solid fuel in a boiler or industrial furnace and enables its effective combustion. The entire beam grate mainly consists of two parts: the frame and the grate pieces, which are usually made of cast iron.

Introduction to the treatment measures for beam grates

When there are slight cracks in the beam grate, it is generally filled with asbestos rope and coated with a layer of refractory cement and asbestos powder mortar. If the area of damage to the furnace wall is large, it can cause the temperature of the boiler support or the surface of the furnace wall to rise abnormally, causing the boiler steel frame and hollow beams to glow red, and there is a risk of collapse of the furnace wall. In this case, the furnace must be stopped immediately, and manpower must be organized for emergency repairs.

What issues need to be considered when selecting a reciprocating grate supplier?

What issues should users pay attention to when choosing reciprocating grate suppliers? Most people may not be very familiar with these. Nowadays, the number of brands of reciprocating grate suppliers in the market is increasing, but there are very few manufacturers with complete production capabilities. Therefore, when choosing a capable manufacturer, focus on the following points.

Do domestic good reciprocating grate manufacturers have advantages?

Careful friends should have noticed that there are many manufacturers of reciprocating grate in the country. In this situation, customers must be quite conflicted when making their choices. Today, we take this opportunity to discuss the advantages of good domestic reciprocating grate manufacturers. I hope this will be helpful to you after reading.

Talk about how to improve the thermal efficiency of the crossbeam grate.

The beam grate is a component used to stack solid fuel in a boiler or industrial furnace and ensure its effective combustion. The entire beam grate mainly consists of two parts: the frame and the grate pieces, which are usually made of cast iron. There are many safety precautions to consider when operating the boiler, and safety glasses must be worn when observing the combustion conditions.

How much do you know about the structure of chain grates and beam grates?

Now, the equipment of the grate manufacturers has gradually realized the intelligent application model. Similarly, the selection and application of boiler accessories are also very important. How much do you know about the structure of chain grates and beam grates? Below, the editor from the beam grate manufacturer will help you understand.