Advantages of Biomass Chain Grate Boilers

It can be simply understood as a chain steam boiler that burns biomass. The chain speed refers to the automatic coal feeding, which slowly and evenly delivers biomass fuel into the furnace through the chain. The biomass chain grate boiler is a boiler product that burns biomass pellets. Biomass pellets are made from agricultural by-products such as straw, sawdust, and peanut shells, making them renewable resources. Therefore, the raw material cost is low, the price of biomass pellets is inexpensive, and the operating cost of biomass boilers is low. Let's explore the advantages of biomass chain grate boilers together!

Structure and Function of Boiler Chain Grate

The chain grate stoker is a long-established, reliable, and stable mechanical coal-burning device in industrial boilers, which is now widely used. Let's take a look at the structure and function of the boiler chain grate stoker!

Introduction to the installation and repair process of reciprocating grate.

Introduction to the installation and repair process of reciprocating grate. Before installing the reciprocating grate, the grate pieces should be removed. The burrs on the flip plate that match the grate beams and other castings should be smoothed to ensure good fit among all parts.

Is the reciprocating grate a product for energy saving and emission reduction?

Is the reciprocating grate a product for energy saving and emission reduction? The task of energy saving and emission reduction in China's foundry industry is urgent and imperative. Promoting energy saving and emission reduction work for reciprocating grates in China's foundry industry should start from two aspects: technological transformation and policy guidance. In terms of technological transformation of reciprocating grates: efforts should be made to improve casting quality, transform outdated equipment, promote the use of energy-saving and emission-reducing equipment, and enhance the casting process technology level of boiler accessory enterprises.

Is the cost of biomass chain grate high?

Currently, the pollution from coal-fired boilers is becoming increasingly severe, the resource extraction of fossil fuels is becoming increasingly insufficient, and the environment is also suffering serious damage. Therefore, both types of fossil fuel boilers are facing a dual crisis of environment and fuel. The adoption of biomass chain boilers is recognized and supported by the national environmental protection department. Whether it is the national preference for environmental protection or the corporate preference for production costs, both can better balance the relationship between the two. So, is the cost of biomass chain boilers high? Let's take a look!

How to save energy in biomass chain grate boilers

The fuel currently used in biomass boilers mainly consists of agricultural and forestry waste or garbage fillers. It is favored by the state and various power plants mainly because the renewable nature of energy resources is much better than that of other fossil fuels. The combustion method is basically direct combustion or processing biomass fuel for combustion. Biomass fuel is relatively inexpensive, but considering various aspects such as biomass energy and environmental protection, the biomass chain furnace technology needs to improve. So, how can the biomass chain grate save energy? Let's take a look!

Advantages of Layered Coal Bunker Operation in Thermal Oil Furnace

Use a new type of layered coal hopper to replace the traditional door-type gravity coal machine. The layered coal machine is a method of mechanically separating the residual heat of the thermal oil furnace. When raw coal falls from the coal bucket outlet into the furnace, it first passes through a screening structure, where the screen is installed at an angle to the furnace, and the direction of the grating is somewhat opposite.

The principle of coal feeding in layered coal bunkers for grate firing.

In recent years, based on the continuous improvement of our country's standards for energy conservation and environmental protection, many new ideas and methods have emerged to achieve the effects of energy conservation and environmental protection. The layered coal bunker allows coal to enter the hot air furnace. The grate. Larger coal blocks are distributed in the lower part of the coal layer, while the coal surface and small particles are distributed in the upper part of the coal layer, thus allowing the coal to burn fully and improving thermal efficiency.