Let's all learn about reciprocating grate.

The reciprocating grate refers to the component in a boiler where solid fuel is effectively piled and burned. It consists of a grate frame and grate bars, which are usually cast from cast iron. After assembly, there must be a ventilation gap maintained between each part.

What are the characteristics of reciprocating grate? What to do if the reciprocating grate rusts?

What are the characteristics of reciprocating grate? What to do if the reciprocating grate rusts? The reciprocating grate is a horizontal three-pass water-fire tube mixed boiler, with a bundle of threaded smoke tubes arranged in the drum. Smooth tubular water-cooled walls are installed on both sides of the reciprocating grate. A lightweight chain grate stoker is used for mechanical coal feeding, equipped with a blower and an induced draft fan for mechanical ventilation, and a scraper slag discharger for automatic slag removal.

How to debug the reciprocating grate before use? How to judge the quality of the reciprocating grate?

To ensure that the reciprocating grate has a longer service life, it must be operated correctly. In fact, there are many types of adjustments to pay attention to during the use of the reciprocating grate. Only by operating the grate correctly can the combustion efficiency of the machine be improved, reducing the disguised use of energy and saving costs for the enterprise.

Inclined reciprocating boiler grate structure

The structure of the inclined reciprocating boiler grate is divided into two types: one is the more common inclined reciprocating grate, and the other is a water-cooled reciprocating boiler grate that has rapidly developed in recent years. The general inclined reciprocating boiler grate is mainly composed of several parts, including movable grate bars, fixed furnace, grate bar transmission mechanism, and reciprocating mechanism.

Introduction to Boiler Grates

The chain grate boiler grate is a type of mechanized combustion equipment that is widely used in industrial boilers, but its application range is limited. The combustion method of the chain grate boiler grate is generally moving fireboat combustion. The ignition condition is limited ignition, and the fuel enters the interior through the coal hopper of the boiler grate. As the boiler grate gradually advances, the burning and consumed coal ash will move to the tail with the movement of the grate.

How to handle the drying of the scale grate?

The scale grate is divided into three parts: the drying furnace, the combustion furnace, and the ash melting furnace. Each section can fully mix the waste during the drop, scale grid, and when the waste falls, flipping and enhancing combustion. Each grate section uses a vertical extraction reciprocating motion, which can push back some of the burning waste to accelerate the drying and ignition of the newly incoming waste. A shear knife is installed between the combustion grate and the ignition grate, which can remove block waste, enhancing the full contact of waste with air, making the combustion of waste cleaner.

What is a scale grate?

The component that accumulates solid fuel and burns it effectively on a grate or industrial furnace. The entire furnace mainly consists of two parts: the frame and the grate. The grate plates are generally made of cast iron, and after assembly, they maintain the necessary ventilation gaps between the grate and the carvings. Often, a separate adjustable air supply chamber is set up below the grate, allowing air to enter the fuel layer through the gaps for combustion. The ash residue after combustion is discharged by manual or mechanical methods. The furnaces can be fixed, mobile, reciprocating, vibrating, or lower-level types.

What is the structure of the Yongning grate?

The inclined reciprocating structure of Yongning grate: 1. The inclined reciprocating grate structure of Yongning has two types of inclined reciprocating fire paths, one is the more common ordinary slope reciprocating fire path, and the other is the water-cooled reciprocating fire path developed in recent years. Generally, the inclined reciprocating furnace mainly consists of a fixed grate, a movable grate, a transmission mechanism, a reciprocating mechanism, etc.